Ceiling for the bathroom - which is better? Ceiling for the bathroom: choose which one is better How to make the ceiling in the bathroom.

There are few problems in life that a pleasant hot bath does not solve. At the same time, your personal comfort in the bathroom is a rather fragile thing, directly dependent on how seriously you took the renovation of this room. Particular attention should be paid to where the hot air flows rise. Which is better to make the ceiling in the bathroom, taking into account the consistently high humidity, hot pipes and often rising steam from very hot water? We offer an elegant or not very, but in any case quite effective solution to the issue in 50 photos with examples of ceiling surfaces in modern bathrooms.

But first, let's list the main requirements that apply to ceilings in bathrooms:

good moisture resistance- the aforementioned steam, constant contact with moisture and elevated temperature with a material that does not meet this criterion will "cope" rather quickly, spoiling even the most beautiful and expensive repair without any regret;
anti-corrosion properties, resistance to mold, stains, stains and condensation- all this directly affects the durability of the mounted ceilings;
temperature reserve- ceiling surfaces should not be afraid of high temperatures or change their performance depending on specific temperature indicators;
the possibility of easy, fast and safe installation of lighting fixtures- it is not worth destroying the mounted structure in order to replace one or two failed lamps.

Of course, each owner will definitely add a couple of his criteria to this list. Without fear of making a mistake, we assume that this is necessarily an attractive aesthetic appearance, hygienic safety and low cost. There is nothing reprehensible in the latter: the money saved is always something to spend on. For example, to a new luxurious bath with armrests, in which it will be even more pleasant to relax after working days. Or a modern shower cabin with a radio. Who is closer.

What material to use for the ceiling in the bathroom?

It is not recommended for use in bathrooms due to poor susceptibility to high temperature conditions and the state of permanently high humidity in the room. If you see whitewash somewhere on the ceiling surface in the bathroom, you are very lucky: usually such ceilings become unusable very quickly, and the owners, having received a cruel lesson in life, move on to other, more practical options.

Styrofoam

The performance characteristics of the foam do not allow this material to be nominated as recommended for use. Most often, it is produced in the form of polystyrene tiles, laid in the manner of ordinary ceramic tiles over the entire ceiling area. If you have been thinking for a long time about which is better to make the ceiling in the bathroom and eventually settled on this option, it means that you are not fully aware of the possible problems that you may encounter later: mold, fungus, constant condensation on the surface, because of which there may be a bad smell. You can forget about comfortable bathing.

Arguably!

Drywall

A rather controversial decision, in which the minuses are approximately equal in number with the pluses. For the use of drywall constructions in the bathroom, they speak of the wide design possibilities that this material in demand today provides. Against - not very reliable moisture resistance and the need to install the crate for subsequent sheathing of the ceiling with plasterboard panels. The likelihood of mold and mildew can be reduced to zero with scrupulous treatment of the material with an antiseptic, but why waste your time on this when there are plenty of other, more practical solutions for use in the bathroom?

The simplest and in most cases the budget option. Why with such a clause? It's all about how smooth your ceiling is, because for painting it needs to be properly prepared and primed. These services cost a lot of money and often take a lot of time.

For painting the ceiling surface, it is best to use latex or water-dispersion paint and avoid water-based paint, since the latter quickly and noticeably loses its color and attractive appearance due to high humidity. In addition, water-dispersion ceiling paint options are easy to care for and easily withstand even the most vigorous and intensive washing.

Colors should be chosen based on the overall color mood of the bathroom. Of course, the most versatile and common is white paint. Behind the seeming banality of the choice lies the quite obvious desire of the owners to make the ceiling in the bathroom universal and practical. At the same time, there are a lot of options with a rather original and curious coloring - we suggest you make sure of this immediately.

Plastic

"Folk" material, which the owners of apartments and houses with enviable persistence are trying to use in any room that is part of their living space. To a large extent, due to its budget: plastic panels are present in a wide range in almost any hardware store and therefore it is always possible to choose the best option for your family repair budget.

Other benefits are obvious:

moisture resistance
variety of textures and colors

However, in any barrel there is always a place for a modest fly in the ointment: if your bathroom has rather low ceilings, then installing plastic panels does not seem to be a rational solution. For a simple reason: it requires the preparation of the so-called frame (battens), which takes a lot of precious centimeters from the top level.

Advice: if, nevertheless, plastic panels on the ceiling are what you want to see in your bathroom, then pay attention to collections with subtle borders between fragments. A solid, monolithic canvas will look more serious, more harmonious and more expensive!

Slatted ceilings

An attractive alternative to classic plastic panels. Due to the similarity of the source material, it has all the advantages that we talked about above.

Cassette ceilings are also widely used, differing from rack structures only in the width of the panels used. For small rooms, such ceilings are an excellent solution - no matter what wall covering you use, you can always choose an option that is consonant in color.

Lovers of regular geometric shapes and modern solutions in the spirit of contemporary - strictly note.

Stretch ceiling

We are destroying the common stereotype that stretch ceilings are undesirable for use in the bathroom (with simple stretch ceilings in the rooms). A countless number of textured solutions and a variety of colors, ample opportunities for photo printing and applying original patterns and other decorative elements, the ability of a stretched canvas to hold up to 100 liters of water in the event of an unexpected flood from somewhere above - is this not a reason to say "yes" to stretch ceilings in the question about which ceiling is optimal for a bathroom?

Do not think about this question - it is rhetorical. It is better to carefully study the options below for stretch ceilings in the bathroom - there are a lot of cool ideas that, perhaps, in the format of your room will find the best practical implementation.

Some interesting design solutions to help

If you have not decided what kind of ceiling you will have in the bathroom, then here is a small selection of original compositions from the arsenal of designers around the world.

Summarizing

We really hope that you have carefully studied the options we have considered, weighed all the pros and cons and are determined to create a real aesthetic revolution within the walls of your small or not very bathroom. Still, deciding which bathroom ceiling is best is only the first step towards building a truly comfortable space within the walls of this vitally important room for every person. There are a lot of nuances and painful repairs ahead, but if you really managed to find a compromise between the dictates of your heart and the voice of reason in your choice, then the probability of enjoying each bath you take is subsequently close to conditionally 100%.

Repair in the shower room is a rather time-consuming and costly process. In addition to installing plumbing, floor and wall finishing, you need to pay attention to the ceiling. How to make a ceiling in the bathroom with your own hands? This question is asked by many. However, only an experienced specialist can give the correct answer, since the choice of material will depend on various parameters.

Today, few people think about finishing the ceiling in the shower. While the room is an important and indispensable part of the overall design of the room. Currently, there are several ways to design. The relatively limited choice is based on the difficult operating conditions of the premises. High humidity, temperature changes, steam and condensate are just some of the obstacles that the finishing material will face.

There is a way out of this situation and not one! A high-quality ceiling in the bathroom with your own hands is a reality. However, first you need to scrupulously approach the issue of selecting raw materials, consult with experts, and also decide on the installation steps. Repairs must be carried out correctly, taking into account all the complexities of the shower room. In addition, it is necessary to decide in advance on the choice of material.

Ordinary

The standard choice of ceiling covering is no finish. During the repair in the bathroom, a large amount of work is carried out and there is not always a desire, opportunity or means to decorate the ceiling. In this case, it is usually leveled, whitewashed or carefully painted over. It looks quite fresh and stylish depending on the chosen shower room interior. Advantages:

no costs;
fresh appearance;
finishing speed.

In addition, such a coating is easily repaired in case of damage or flood from the upper floors. In addition, it will not be as pitiful as, for example, expensive options, and restoring the original appearance is quite easy and not expensive. In maintenance, such a ceiling is very unpretentious, you do not need to think about the choice of design and type of installation. Flaws:

fragility;
lack of a presentable appearance;
all surface imperfections are visible.

Need to know! In order to hide the unevenness of the ceiling and save money, it is best to lay moisture-resistant drywall.

tension material

Installing a stretch ceiling in the bathroom is easy and fast. This material will give originality to the shower room, as well as emphasize the dignity of the room. From the name it follows that the design takes place according to the technology of tensioning a special fabric made of fabric or plastic. The last option is by far the most relevant for the bathroom.

Advantages:

Saves the height of the space.
Installation of any kind of lighting.
Perfectly flat surface.
Aesthetics.

Installation of the product is carried out using special equipment, which allows installation in a short time. Specialists carry out the laying of the material with high quality, however, it is impossible to repeat the procedure on your own, especially without the appropriate tool. In addition, tension types have a number of disadvantages. Weak sides:

high price;
weak strength;
melting possibility.

Plastic decorative panels

Properly carried out repairs will not only turn the shower room into an attractive room, but will also provide an opportunity to significantly reduce budget costs. Installation with plastic panels can be done independently. The following criteria can be attributed to the advantages of the material:

low cost;
attractive appearance;
the possibility of installing various types of lighting.

Products are attached to each other with special fasteners that have a secure grip. In appearance, we can say that the joints are not very noticeable or look quite organic. In addition, plastic repair materials, as well as consumables, are characterized by an inexpensive price. However, in addition to the positive aspects, there are also negative ones. For example:

Possibility of deformation during transportation.
Poor assembly makes the seams more visible.

Self-assembly from plastic

Do-it-yourself installation of plastic panels in the shower room is considered to be the simplest of all. Other materials require special tools, as well as some skills and dexterity. In this case, absolutely everyone can cope with the repair in the bathroom. In order to correctly install the panels, you must:

After completing the stages of work, you can proceed directly to the repair of the wall itself - finishing with shower plastic panels.

rack frame

Suspended slatted ceilings are a structure in the form of aluminum elements attached to stingers, which, in turn, are installed parallel to each other on the ceiling. The distance between the stingers should not exceed a gap of 0.4–1.2 m. They are equipped with a special mechanism like a spring that allows you to level the products on one level.

With self-tapping screws, these elements are installed to the ceiling, after which alignment is carried out along a vertical plane. Only after completing this stage of repair to the end, you can proceed to the next step - the installation of rails. It is necessary to choose a product that will be the first or last in the design, and then install it 30 mm shorter than the length of the ceiling itself.

There is a concern that the batten needs to be shortened, as it is not always possible to hit exactly the length of the batten in accordance with the length of the ceiling. Circumcision occurs with a sharp knife and very carefully, otherwise the workpiece may be deformed. The intended segment is best divided into smaller sections, make an incision with a knife and break them off one by one. After that, the rail is installed in the end profile and fixed to the ceiling.

Drywall

To date, the sheets has a stable popularity. In residential areas, it is able to bring a touch of style and practicality. To start the repair, you need to choose a moisture-resistant material. After that, the height level of the room where the ceiling will be installed is determined. Consideration should be given to the space for lighting and wiring - this is approximately a distance of 10 cm.

Having marked the zero level, a guide profile is attached with dowels. The gaps between the dowels should not exceed 0.5 m. The ceiling profile is fixed at a distance of 35-40 cm and fixed with transverse inserts. When fitting the material, you need to make a cut, and then break the first layer, and then the second. The resulting cut is cleaned with a planer.

Video instruction

What ceiling to make in the bathroom? Of course, practical, beautiful and desirable, not very expensive. In order to get just such, in addition to the aesthetic qualities and preferences in the material, you need to take into account all aspects and nuances of the state of a particular room, and also know what general technical requirements the ceilings in the bathrooms must meet.

Aluminum panel ceiling

Features and requirements for ceilings in the bathroom

In order for the ceiling in the bathroom not only to look beautiful, but also to serve for a long time, without causing any trouble during its operation, you need to know what qualities it must have and what technical requirements it must meet.

Mirrored ceiling in the bathroom, base wooden lath

Of course, considering what ceiling to make in the bath, first of all, you need to consider that the main difference between this room and all the others is that it is always warm and damp in it, which is the perfect combination for the appearance and growth of mold.

In addition, this combination leads to the formation of corrosion and rust on metal and rotting in wood that has not been treated with special building and moisture-protecting solutions.

Plexiglas glass ceiling

Therefore, the use of metal and wooden elements in the structure is undesirable, unless, of course, they are covered with protective layers, for example,. In general, the design of the ceiling in the bathroom should:

be protected from moisture or have complete immunity to it;
do not require careful maintenance, and if necessary, easy to clean;
do not interact with the environment, that is, do not emit any fumes;
must be made with the possibility of access to all elements and fasteners, for their easy replacement or cleaning if necessary.

Plastic ceiling, base frame made of wooden beams

The design of the ceiling is not limited by anything other than imagination and the budget allotted for it, that is, which ceiling is better to do in the bathroom, depends only on how a particular person imagines it.

Types of bathroom ceilings (features, pros, cons)

Design methods, that is, options for what ceiling can be done in the bathroom, enough. The most simple, familiar and budgetary include the following - whitewashing, plastering and painting. Among the most expensive and complex, it is worth highlighting such ceilings as glass structures, mirror ceilings, ceilings with photo printing.

Cassette ceiling

Among those in the middle price category, the most popular are such design options as plastic sheathing, the use of foam tiles and vinyl wallpaper, hinged structures made of inexpensive and moisture-resistant materials, for example, from processed chipboard or.

Colored stretch ceiling

For each method, what ceiling to make in the bathroom, There is reviews highlighting the main advantages and disadvantages. It is easy to find discussions of the pros and cons of various options for how exactly you can repair the ceiling and read reviews about various materials on specialized forums, in online stores and in social network groups.

Whitewashing, painting and plastering

The advantages of these, without exaggeration, already classic repair methods include:

all materials that are required are always on sale;
all work can be done by hand and quickly;
the paint is not susceptible to moisture, and the lime that is part of the solutions for whitewashing and plastering is a powerful antiseptic, that is, it prevents the likelihood of mold.

The disadvantages include such nuances as:

very simple, unpresentable in appearance, appearance;
significant preliminary surface preparation - leveling, "scraping" from the existing coating or washing off the old whitewash, or some other work;
the need to refresh the design at least once every couple of years;
when spray hits a whitewashed ceiling, stains and smudges remain on it.

Bathroom under the stairs, matte stretch ceiling

Painting has other advantages - the ability to show imagination, up to painting the ceilings, and when using modern bulk mixtures for plastering, you can create any texture and give absolutely any shade to the surface.

Vinyl wallpaper, PVC tiles, plastic, chipboard and drywall

Materials that are in the middle price segment also have their pluses and minuses.

The undoubted advantages include such nuances:

low cost of finishing;
relatively low complexity of the work, everything can be done independently, with the exception of hinged structures, but they can also be done by hand with the appropriate tool;
cozy and neat appearance of the finished ceiling.

The disadvantages include features such as:

surface preparation is no less troublesome than for painting;
under hinged canvases, both from moisture-resistant drywall and from treated chipboard, a layer of mold can form, the same is true for vinyl wallpapers designed specifically for bathrooms;
it is extremely difficult for one person to cope with the installation of a false ceiling and sticking wallpaper on the ceiling;
some types of design will require a special tool, knowledge and experience.

Ceiling made of pvc plastic panels

Plastic ceilings made of panels seem ideal - no thorough preparation is required, the material itself is absolutely not susceptible to moisture and is easy to clean, and it looks quite aesthetically pleasing and, which is not unimportant, will not require replacement or adjustment for many years.

But plastic panels also have their drawbacks. Of course, first of all, this is what will require some skill tools and a careful selection of hardware and profiles for the supporting structure, because, unlike the plastic itself, they are very susceptible to moisture.

Tiled ceiling

The second drawback is the likelihood of mold formation on the inside of the coating, in the gap between the ceiling and the panels, in the event that there is a slight flood from above or under some other circumstances favorable for the fungus.

Other design options

Prioritizing the question what ceiling to make in the bathroom, expensive and exclusive types of design made of glass, mirror blocks or any other types of materials, you need to understand that they will also have certain disadvantages, but which ones depends on the material itself and the means that will be used during installation works.

Two-level stretch ceiling

In general, going make a ceiling in the bathroom and toilet, it should, in addition to all of the above, take into account the footage of the room, because when decorating small areas, very expensive materials can be allowed, since very few of them are required, which means that the cost will be quite acceptable at any level of income.

Carrying out repairs in the bathroom, many pay all their attention to engineering communications and the method of finishing the walls, ignoring such an equally important element of the room as the ceiling. Although in fact the ceiling also requires special attention. Depending on the wall finishing material, ceiling installation can be carried out both before and after wall finishing. In this article, we will talk about what are the options for the ceiling in the bathroom, and consider each of them in as much detail as possible.

What are the requirements for ceilings in the bathroom

It is worth noting that the bathroom is a room with constant high humidity and frequent temperature changes. Therefore, any version of the ceiling device in the bathroom must meet special requirements.

Before deciding what material to make the ceiling in the bathroom, you need to take into account the following requirements for finishing materials:

Enhanced hydrophobic qualities. The material must have high water resistance - not deteriorate during operation in conditions of high humidity. You should always be prepared for the fact that the ceiling covering will be splashed with water (for example, children can accidentally direct a stream of rain directly onto the ceiling). The material should easily cope with such an impact.
Ease of care. This is very important for those who have high ceilings in the bathroom, and a stepladder is indispensable for cleaning them. Many owners with 3 meter ceilings in the bathroom may face a banal problem - replacing a light bulb in a lamp. In this case, even improvised means will not help to solve the problem. As a result, due to your thoughtlessness, you will again and again have to sweep dust from the ceiling, which, for example, was covered with some kind of decorative material. It should be noted that due to the above reason, it is not recommended to hang chandeliers in the bathroom. Such lighting devices are rather poorly operated in an environment with high humidity. At the same time, they are equipped with so many small parts that you simply get tired of servicing them after a few months. Don't even try to test it out for yourself.
High aesthetic properties. In addition to the operational and technical characteristics of the finishing material for the ceiling, it is also worth paying attention to how it looks externally. It's no secret that in the process of taking a bath, the gaze is directed precisely at the ceiling.

Ways to decorate the ceiling in the bathroom

Now it’s worth considering in more detail how to sew up the ceiling in the bathroom. Naturally, the list will not be complete, but these will be the most common options, from which everyone can choose the best suitable solution for themselves.

Puttying and painting

Perhaps everyone knows that the easiest way to finish the ceiling in the bathroom is to simply putty it and paint it. Almost everyone can do this type of work with their own hands, while the materials themselves will need to spend a minimum of money.

However, before you make the ceiling in the bathroom with this method, it is worth considering a number of important nuances:

Puttying followed by painting is cost effective only if the ceiling has a flat base and you do not have to eliminate significant height differences by spending a lot of putty. In addition, in order for a thick layer of putty to be able to stay on the ceiling, additional skills and costs will be needed.
As a topcoat, use paint, not chalk-based compounds, as some craftsmen may advise. Otherwise, you will have to re-whitewash the three-meter ceiling more than once a year.

Due to the fact that the pros and cons of such a ceiling covering for a bathroom will differ for many people, it is worth listing exactly its technical characteristics and performance properties, and everyone will decide for himself which of them are best suited for solving a particular task.

It is worth highlighting the following performance qualities and technical characteristics of the putty ceiling:

The finished ceiling will not look perfect from a design point of view, but if it is painted in different colors, it will acquire some uniqueness. If you have a design talent, then with the use of paint you can create a truly work of art.
A puttied and painted ceiling can serve for quite a long time - up to 10 years. But this is taking into account that during this time the neighbors from above will not spoil everything. Therefore, if incidents of this kind often occur in your apartment, once again think about how best to finish the ceiling in the bathroom in this case. It is understood that such a finishing material, under the direct influence of moisture, quickly deteriorates. And although such flaws are relatively easy to eliminate, you should always have a brush, paint and a stepladder on hand, without which it will be quite problematic to get to the ceiling.
The ceiling does not require much effort in its maintenance, but over time it will darken anyway. This happens because particles of dirt eat into the paint, which are washed off with detergents worse and worse over time.
Such a ceiling cannot be equipped with engineering communications, especially for the ventilation system and electric lighting. In this case, it remains to be content with a pendant or wall-mounted lamp and a fan mounted in a niche (without air outlets).

For many, it is the last point that will become the decisive factor in deciding which ceilings are best for the bathroom, namely, not to use this finishing method.

Plastic panels

Such panels are made of PVC - a special plastic with technical characteristics that are best suited for use in rooms with high humidity.

To make it easier to decide which ceiling to make in the bathroom, it is worth listing all the advantages and disadvantages of this material.

Advantages:

Plastic panels are very durable and perfectly cope with mechanical stress. This means that if you accidentally touch the panel with an object, the polymer will remain intact. Naturally, due to strong impact, dents and scratches may remain.
Plastic is not afraid of high humidity and even direct contact with water - neither its appearance nor its performance will deteriorate in any way.
When deciding which bathroom ceiling is best for you, keep in mind that material such as plastic is easy to install on your own. The main thing at the same time is to properly mount the metal profile, and everyone can handle the plastic sheathing.
The plastic surface is quite easy to care for. For cleaning, it is enough to use simple detergents and a rag.
Between the ceiling and the panels, you can hide any number of communications, such as electrical wiring, lighting, as well as a ventilation system.

The disadvantages include:

For plastic panels, you will need to install a frame made of metal or wood. A structure made of wood, even of high quality, will deteriorate after a while, which will require the manufacture of a new one. To extend the life of such a ceiling, it is recommended to equip the bathroom with high-quality ventilation.
Any panels after installation form cracks into which dust accumulates over time. The accumulated dirt can be easily removed with a rag, however, if the room has high humidity, mold begins to form in the seams, which cannot be eliminated without an antiseptic.
As you know, plastics have a negative impact on human health, as they release harmful chemicals. In fact, modern materials are absolutely safe for humans - this is confirmed by the relevant quality certificates.

When choosing which ceilings are best done in the bathroom, you should pay attention to the fact that the plastic ceiling looks good in combination with the use of this material on the walls.

However, if you are a person with a sophisticated taste that requires something special, you may be interested in the next type of ceiling, namely, on slats.

Ceiling made of aluminum rails

This kind of ceiling is called rack. The name, as many could already understand, was formed from the use of long parts installed on the crate. On sale you can find rails made of aluminum and other metals, as well as plastic.

Many people choose aluminum rails because of their special performance characteristics. This metal is not afraid of oxidation, it is not even afraid of water. In addition, the appearance of aluminum panels will not leave anyone indifferent even without the use of any decorative finish.

To better understand which ceiling to install in the bathroom, take into account that the rack ceiling is presented by manufacturers in the following versions:

chromium-plated;
under gilding;
monotonous products;
patterned panels.

These panels are somewhat bendable, allowing for curved designs to meet specific design requirements.

Installation of panels does not raise any questions at all. They are equipped with everything you need, so even a beginner who has assembled a children's designer at least once in his life will cope with the installation process. The main thing before such work is to thoroughly study the installation instructions.

Keep in mind that when choosing which ceiling to make in the bathroom, slatted ceilings have three disadvantages:

If your choice fell on slats that fit tightly together, dirt will still accumulate in the seams. Of course, you can get rid of it by simply wiping it with a damp cloth.
The slatted ceiling should be part of the interior style. Remember that not every bathroom will have such a ceiling solution. In any case, the overall interior should be worked out in advance.
The finished design will make the room a little lower. Some people may like it, because as a result it is possible to disguise engineering communications, while for others such a ceiling will, as it were, “press” on the head, unless of course you have three-meter ceilings. In order to get rid of this effect, it is best to install ceilings with a glossy surface - this will visually increase the space a little.

Plasterboard false ceiling

Drywall sheets, as well as plastic lining, are installed on a pre-mounted crate, which in turn can be made of galvanized or wooden profiles. It is still better not to use wooden slats, especially in rooms with high humidity, as this will quickly make them unusable.

For the bathroom, of course, moisture-resistant drywall should be purchased, which is treated with an antiseptic composition and is designed for use in aggressive environments. Thus, it will be possible not to be afraid about the possible appearance of mold and other dangerous microorganisms.

Moisture-resistant drywall is distinguished by its coloring - it is green with an additional GKLV marking.

The advantages of a plasterboard ceiling include:

The possibility of organizing a special, unique ceiling in the bathroom. Many prefer the installation of multi-level structures of any curvature.
A certain amount of engineering communications can fit behind the crate. The lamps installed in such a ceiling fit perfectly into the overall design of the bathroom.
Installation of such a design will easily mask any curvature and other shortcomings of interfloor slabs.
The plasterboard suspended ceiling is also characterized by a long service life.

However, there are also disadvantages:

Such a ceiling costs a lot. In this case, you will have to spend money not only on materials, but also on the services of experienced craftsmen who can translate your wishes into reality.
For the ceiling, you will need to organize a decorative finish. In any case, you will need to buy putty, primer and paint. And this is without taking into account the time spent on such a process.
The ceiling covering will need to be updated occasionally, because over time it loses its former brightness due to the presence of constant excessive humidity in the room.

If, when deciding which ceilings are best done in the bathroom, you don’t want to spend extra money on slats, and you simply don’t have so much time to install drywall, you can pay attention to another type of suspended ceilings, which we’ll talk about later.

Hanging tiles

For installation on the ceiling of suspended tiles, it is also necessary to build a special frame from a metal profile, in the cells of which ready-made tiles or cassettes will be placed.

Unlike suspended ceilings sheathed with plasterboard, in this case the tiles have a finished appearance, that is, they do not require further finishing, such as painting or puttying. This is their great advantage.

In the cells of the frame ceiling, you can place tiles made of the following materials:

plexiglass;
plastic;
mineral plates;
metal.

If the ceiling tiles in the bathroom are supplemented with built-in LED lighting, then a rather original design is obtained. Thanks to a variety of color solutions for lighting, you can highlight individual objects in the room, or make it look like a spaceship.

It is worth noting that when deciding which ceiling to make in the bathroom, the choice does not always fall on hanging tiles, since in some cases they can look somewhat bureaucratic, like in an office, and you can’t pick them up for any interior. Not everyone will want to look at a boring and uninteresting ceiling, devoid of grace.

However, for lovers of minimalism or high-tech style, a metal tile ceiling will perfectly reflect their preferences.

Mirror ceilings

Among the options for which ceilings are best done in the bathroom, it is worthwhile to dwell on mirrors separately. Although such a ceiling will cost significantly more than traditional materials, the end result will be worth the effort and money spent. Mirrors on the ceiling in the bathroom will expand the space visually and effectively emphasize the interior of the room.

Since the mass of the mirror sheet is large enough, it requires the installation of a reinforced frame to mount it. In the mirrors themselves, to fix them on the metal profiles with the help of screws, you will need to drill holes. This task is far from easy.

Alternatively, you can use not real mirrors, but mirror panels that have good reflectivity. They are installed on a special, quickly mounted suspension system. This work does not take much time and effort.

Please note that prefabricated frames for inexpensive mirror panels are often prone to corrosion, so they must be mounted in such a way as to ensure air flow.

It is worth noting that the mirrors on the ceiling in the bathroom still have certain disadvantages, including:

Sometimes the mirrored ceiling glares too much, so that it interferes and irritates the eyesight. If the ceilings are very low or a person spends a lot of time in the bathroom, he may not like this option.
Dust is quickly collected on the mirrors, which is quite clearly visible. Therefore, in order for the appearance of the ceiling to please the eye, it will often have to be looked after, which can be very difficult. In this regard, when deciding to arrange a mirrored ceiling in the bathroom, think about how and who will wash it.

Stretch ceiling

Finally, another example of what kind of ceilings are made in the bathroom is a stretch fabric. This version of the ceiling has recently become increasingly popular among consumers. And there is a reason.

The advantages of a stretch ceiling are obvious:

not afraid of moisture, retains its original appearance and properties in a humid environment;
no additional finishing measures are required;
great for masking wires or communication boxes running under the ceiling;
easy to clean - you can use ordinary household chemicals for cleaning;
a variety of colors and textures - glossy, matte, with a two- or three-dimensional image.

In addition, if you are flooded by neighbors from above or the roof leaks, the stretch fabric is able to hold a fairly large amount of water. After the masters arrive and drain the water, the ceiling will return to its original state.

Disadvantages, in our opinion, the stretch ceilings are few enough.

The most significant of them are:

The special technology of installation of stretch ceilings and the need for special equipment make this type of repair impossible for one's own execution.
PVC fabric, despite its strength characteristics, is afraid of sharp objects. That is, it can be easily damaged. In this case, the appearance of the ceiling will be spoiled, and it will not be able to hold water from above.

Please note that in combination with stretch ceilings, it is desirable to install low-power LED lighting devices. They do not create high temperatures during operation, unlike halogen lamps, for example. Therefore, the PVC fabric at the point of contact with the spotlight will not turn yellow and will not deform.

For all those who have yet to make a difficult choice in favor of one or another type of ceiling covering for the bathroom, here are a few recommendations:

The first thing to remember is that the ceiling should organically fit into the interior of the bathroom itself. It is also desirable that at the same time it does not contrast too much with the rest of the rooms in the apartment, that is, it does not stand out from the general color scheme. Therefore, it is best, of course, to stay on a white coating. It can be stretch, plasterboard or cellular. If desired, spotlights can be installed.
If the space for one reason or another does not quite suit you in size, you can visually expand or narrow it with the help of textured surfaces. The texture will be clearly visible on modular and slatted ceiling materials.
Owners of spacious bathrooms can afford to equip multi-level ceilings. They are constructed from drywall and frame structures. The geometry of the levels can be very different - combined in shape and size with functional areas, highlight individual objects. There may be many options.
If the goal is an inexpensive, practical ceiling without any frills, plastic panels will be the best option.

The stretch ceiling is also practical, but its installation will require additional payment for the construction team.

Results

Thus, there are a lot of options for arranging the ceiling in the bathroom. All of them differ in cost, appearance, complexity of execution and features of care. Therefore, everyone chooses the material that meets his requirements the most.